#Icarus-Frames

tag

Archive Re-Up: Chris’ Icarus Race Bike

Radar

Archive Re-Up: Chris’ Icarus Race Bike

When we lost our 2015 image bucket back in 2018, it was a huge bummer, but over the past few months, I’ve been digging out hard drives and re-editing some photos, in the hopes of filling in the bigger holes. With this real winter we’ve been having, I’ve had a bit more free time to take a deep dive into the archives, and today, I’m sharing an iconic bike from Icarus that shook the internet when I posted it: Chris’ Icarus Race Bike

Check it out in all its fluoro glory here: Chris’ Icarus Race Bike

I should also note that my intent here is only to upload lost photos, keeping the text and formatting intact.

Gideon’s Icarus All Road Bike is a Vessel to Experience Silence

Reportage

Gideon’s Icarus All Road Bike is a Vessel to Experience Silence

Longtime readers might recognize this bike. I first documented it in 2015. Unfortunately, when our server crashed, we lost the images from 2015-2016, so when I had the opportunity to re-document it, I had to jump on the opportunity. The frame was built by Ian Sutton of Icarus Frames. It was designed to clear a 45mm 700c tire, and yes, those are quick-release axles! This bike was ahead of its time in terms of “gravel bikes” and it’s still alive and well, now rolling under my bud Gideon Tsang who bought it a little while back. Gideon is a good friend of mine, going on 10 years. He’s a spiritual person, a counselor, and as much of a sage individual as anyone I know. Check out this piece he wrote for the Radavist about riding bikes and embracing the silence only found on self-isolating rides…

Josh’s Beat the Clock Cycling Icarus Road

Reportage

Josh’s Beat the Clock Cycling Icarus Road

Big guys have big headtubes. How big? Bigger than a tallboy? Depends, but if you’re a Texan like Josh Hines, everything’s bigger there, so why stop with a bicycle?

Joking aside. Josh and I are buddies from Austin. He’s in Los Angeles this week to take on some mountains and break in his new Icarus Frames road bike. After being fed up with stock sizing and carbon fiber, he wanted something with more longevity so Josh turned to Ian Sutton to make him a special road bike… and special it is.

Ian’s not one to turn down a challenge. Well, that’s not true, I’m sure everyone has their limits but let’s just say Josh’s request piqued his interest. While Icarus has made carbon and steel bikes before, he hadn’t spent much time working with carbon seat tubes, which is what Josh wanted. Will Ian do it again? Probably not, as it turned into quite the challenge. Does it look rad? Of course!

Josh wanted a road bike for long days in the saddle. His full time job of being a chef doesn’t offer much free time, so when he has a day off, he wants to spend it all on the bike. He wanted the frame to be painted to match his older Beat the Clock Cycling kit, which has geometric patterns all over it and while the frame is about a month old, the parts were all bought used. Even those Bontrager Aeolus wheels! In fact, all he’s waiting on is a new stem, painted to match the Ben Falcon-paint job and he’ll clean up that steerer-area asap.

Til then, Josh has been enjoying Los Angeles’ killer road climbs. Yesterday he rode Mt. Wilson and we’re trying to convince him to take on Cloudburst… We’ll see! Even if he doesn’t, that bike will be happy regardless.

Oh yeah, how’s that new Will Bryant-designed Beat the Clock Cycling kit? So good!

Chris’ Dark Horse Icarus Commuter

Reportage

Chris’ Dark Horse Icarus Commuter

Part commuter, part touring bike, beautiful functionality with that Icarus flair.

Chris wanted a bike that did all of the above. Having already commissioned Ian to build him a matte black road bike, he knew exactly what he wanted in a commuter. Tubus titanium racks, SON hub, Edelux lamp, Chris King, Paul components, custom painted Berthoud fenders, Swift Industries panniers, Jack Brown Blues and White Industries cranks, all being operated by SRAM’s XO long cage rear derailleur and barcons.

A lot of the parts selection was informed by my Geekhouse when Chris was selecting his kit. Dependability was the most important issue yet as we said earlier, it needed to be beautifully functional.

Maybe he’ll have time to get out on a tour? Or maybe it’ll just serve him as it has for the past year as a commuter for Austin, TX.

The poll is in and we have a winner… Get Ian from Icarus Frames to build you a winner by contacting him.

Icarus Frames: Commuterando for Blue Lug

Radar

Icarus Frames: Commuterando for Blue Lug

For frame builders, randonneuring, or commuter frames can present a bit of a headache with all of the braze-ons and clearance concerns. It certainly takes a bit of planning, fittings and patience. Ian Sutton at Icarus Frames recently published one such project on his blog.

This “commuterando” frame features unique bottom bracket cable routing, a custom stem with internal brake hanger and a bell mount. The classic proportions, round tubing and 650b 38mm tires make it comfortable for bumping around the city or cruising down a dirt path.

Kudos to Ben Falcon for the paint and a cross-Pacific high five goes to the crew at Blue Lug Tokyo for the build. See more detailed photos at the Icarus blog.

Tyler’s Icarus All-Road Disc

Reportage

Tyler’s Icarus All-Road Disc

It’s not a cross bike, it’s a road bike with clearances for bigger tires. Sure it uses an ENVE disc cross fork, but the bottom bracket drop, chainstay length and angles are more in line with what many would categorize as a road bike. A road bike that likes to gobble up rugged and rutted roads.

The Bruce Gordon Rock n Road tires were the starting point for Ian at Icarus Frames to build Tyler his new all-road machine. He wanted hydro disc brakes and road gearing, which he may or may not swap out in the forthcoming months for a clutch and a wider range cassette. With a burnt orange paint and subtle Icarus branding on the downtube, Tyler’s bike has a confident stance without being overly gaudy. Keep it clean with the paint and get it nice and dirty…

Truth told, I’ve been wanting a bike like this for some time now and it was a pleasure being able to document it both for Icarus Frames and Tyler.

Thanks to Jonathan from Mellow Johnny’s for the build!

Get Sick New Bike Day

Radar

Get Sick New Bike Day

If you can’t tell, the “sickness” has spilled over into the weekend. I hope you’re all out riding and soaking in the summer sunshine. More on this bike next week!

Icarus Frames: Matte Black Road Frame

Reportage

Icarus Frames: Matte Black Road Frame

Ian from Icarus Frames came by the Radavist HQ today and he brought this new matte black road frame that just came back from paint. With a mix of True Temper OX Platinum at the seat tube, head tube and Columbus Zona / Life elsewhere, it’s got modern lines with very classic proportions. This one’s a beaut! Clean fillets, a braze-on front derailleur hanger and an ENVE road fork.

My favorite detail however was the arrow, painted on the top tube and the classic Icarus insignia on the downtube.

Shooting matte bikes in a studio isn’t easy, but I’m getting the hang for it. I wish I could shoot this beaut all built up. Instead, you’ll just have to check out more studio photos of this killer frame below.

Ian from Icarus Frame’s Personal True Temper S3 Road

Reportage

Ian from Icarus Frame’s Personal True Temper S3 Road

As a frame builder, Ian Sutton of Icarus Frames has built many people their dream bikes. Road, track, cross, touring, light-touring and even a few mountain bikes. Most recently, he’s been building a lot of lightweight road frames with modern tubesets like True Temper’s S3.

Paired with Columbus’ oversized stays, Ian got to work on his own S3 frame. Since he doesn’t often build with this tubeset, he wanted to try it out for himself before recommending it to any customer for their own frame.

When he finished the frame, it went off to Circle A for paint and the locals here in Austin pitched in for some parts so he could get it rolling. Thanks to David from Nelo’s and Chris from Mellow Johnny’s for putting this bike together for Ian!

To top it off, Josh from Sparse sent Ian a set of lights to match.

Ian and I joked about hating our long head tubes, but that’s what we ride and for this being such a tall bike, I think it looks extremely well balanced. Now if I can just get him out into the hills!

Andre’s Sparkle Icarus Track Machine

Reportage

Andre’s Sparkle Icarus Track Machine

A while back, I posted about Ian Sutton of Icarus Frames trying to sell this prototype track machine here in Austin. Turns out, my buddy – and part time intern – Andre picked it up. Rather than go with a classy, wet coat, he got it painted dark black with a clear sparkle top coat. Something that neither Ian nor myself saw coming…

I’ll admit, both of us were apprehensive, but when I saw the bike in person, I knew exactly what Andre was going for and Circle A killed it!

Andre built the bike up with all Zipp components: seatpost, bars, bartape and stem. For wheels, he went PAUL track hubs to H+Son Archetypes and SRAM Omnium cranks. It’s a standard, classy build on a very unique frameset. Since he works at Mellow Johnny’s he had the mechanics dial everything in.

The Cervelo fork and its tight clearances are right at home with this frame, that barely squeezes in a 23c tire. It’s a mean steed with a bit of sassy sparkles.

Ride safe Andre!

Chris’ Icarus Race Bike

Reportage

Chris’ Icarus Race Bike

This is the bike that really put Ian from Icarus Frames on the map. Well, at least that’s what I think anyway. My reasoning? It was one of the first truly over-sized / shaped tubesets he fillet brazed and the Fresh Frame paint job was so loud at the time, that I don’t think anyone was coming close to hitting that mark. Seriously, what the hell is up with those chevrons?!