The Radavist

We’re kicking off our 2024 MADE Bike Show coverage from Portland, Oregon, with Part 01. Inside is some serious heat! Continue reading below for selects from bRad, Caletti, Chumba, Hot Salad, English, Prova, Rare Earth, Slow Southern Steel, Stinner, and Tomii…

We’re here in Portland, covering the 2023 MADE Bike Show, looking for bikes that we thought you, the readers of The Radavist would appreciate. Josh and John have been scouring the halls of the show for bikes to document, and we’ve got Part 05 of our coverage for you to enjoy…

Thanks to 1-Up USA for sponsoring our continued 2023 MADE Bike Show coverage!

It’s that time of year again! ENVE’s Open House, aka the Builder Round-Up and Grodeo event is this weekend in Ogden, Utah, so I packed up my bike portrait kit and drove up through beautiful summer monsoons to document a selection of bikes from this year’s event. Check out a thoroughly documented stable from the Round Up below, beginning with Chumba, Falconer, Firefly, Mariposa, Scarab, Sklar, and Tomii…

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so we’re doing just that…

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so this week, we’re doing just that. Here’s Kevin’s Gravel Packer, complete with paint by Jordan Low and Andrew the Maker bags…

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so this week, we’re doing just that…

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so this week, we’re doing just that, beginning with Blake’s Gravel Hunter, complete with custom Andrew the Maker bags and a stunning paint job by Jordan Low. Sit back and enjoy clicking through these beautiful photos of an equally as beautiful bicycle…

Yesterday we took a deep dive into the shop of Tomii Cycles. Typically, builders use their own bikes to experiment and explore ideas, concepts, and construction techniques they’ll later use on their client’s bikes. This reasoning is why I always gravitate towards a builder’s own bike when I’m visiting a shop.

My first experience with Nao Tomii from Tomii Cycles was via his old brand, 3RRR, which focused on small components like chainrings, developed in part with industrial design office 44RN. While in Boston, he learned to build bikes under the instruction of Ian Sutton, from Icarus Frames. When he moved to Austin shortly after, I began seeing his bikes pop up all over town, each beautifully constructed and specced, with color palettes so unique to the cycling industry’s normal flashy vibrancy. Nao has an eye for design, proportions, and a willingness to strive for perfection. His work is wildly underappreciated in the saturated market of handmade frames.